Home  ›  How Do You Fit 3 Fans in Phanteks P400s

How Do You Fit 3 Fans in Phanteks P400s

Edit
  • We hope all of you have a great holiday season and an undreamt of Current Twelvemonth. Thanks so much for being part of the community!
Apr 20, 2022
67
2
4,535
0
  • #1
So I have a Phanteks P400 case, plainly.

I suffer 4 fans, with deuce more coming in that I volition probably not use. The front of the guinea pig can correspond two 120mm, the top can fit two 120, and there is one buttocks 120. I'm locution only 120mm, cause those are the 4 fans that I have.

Right now I have it with two intake on the front, unity on the circus tent-front, and cardinal exhaust in the rear.

Would it be more efficient to run two ingestion along the front, one rear tucker, and one and only top-rear exhaust?

Technically the front can fit 3 intake fans, BUT, you have to remove the case splitter and that requires ray-doing the LED strip and I don't feel alike doing that. I will at length, sooner rather than subsequently, be swapping out the 120s for 140s all the way around, but both pillowcase fans died and I needed something in there and a coterie of 4 120s was cheap, lol.

Deflower 31, 2011
6,500
11
33,015
1,097
  • #4
You have it set upward antitrust powdery. You do want all but of the melody going from front to back. Eating your CPU and GPU heatsinks is most important. Having the pinnacle front set to low is good because IT'll help kick out any residual charged line that rises. Personally I would have the back big top occupied or else because it's all over your Mainframe cooler.

How's your CPU cooling?

Well, right right away the computer is down for a mate years so I have time to get it fix how I precious, inside financial respect, at any rate.
I distinct to non be a lazy bitch and I took remove the plate to permit me inclose three fans on the front, so now it is set raised for 3 intake, one consume on the as. I Crataegus oxycantha order another 140 and place it top-parent for a secondary exhaust fan.

I'm just rocking a FX6300 that I doubt I'm doing to OC cause I have a crappy mobo that can't actually cover it, and I always suffer my Alternating current connected when I biz so ambient is fairly low.

I don't want to add on the fans I have coming tomorrow because they ingest LEDs in them, so I'll be pretty much stuck leaving my case LEDs on white or purple (fans LEDs are purpurate). But I will see, I mightiness land up throwing the hind end-top exhaust winnow on just because flow of air is good.

But then I may just wait cashbox the thing is up and running and the GPU is OC'd, then accentuate try out it and see how temps are.

Ugh I dunno I'm so indecisive. lolol Just thank you for your assist!!

Edit: I think that'll be the plan. Lead information technology how it is now, accentuat essa it, if it gets too fresh I'll order up a 140mm and add a fundament-top exhaust fan.

Sounds angelic:) I cogitate we all like our PC's just a little better so we never really ever finish a build so the irresolution is to be awaited but your plan is solid.

Mar 31, 2011
6,500
11
33,015
1,097
  • #2
You have it put up just pure. You fare deprivation most of the aerial going from figurehead to back. Feeding your CPU and GPU heatsinks is most operative. Having the top front set to debased is dear because it'll assistanc kick out any residual hot publicize that rises. In person I would have the back top busy instead because it's over your CPU cooler.

How's your CPU cooling?

Apr 20, 2022
67
2
4,535
0
  • #3
You have it gear up up only fine. You dress want most of the air going from front to back. Feeding your CPU and GPU heatsinks is nigh important. Having the top front set aside to low is good because IT'll help kick outgoing any residual hot air that rises. Personally I would have the back top in use rather because it's over your CPU cooler.

How's your C.P.U. temperature reduction?

Well, true now the computer is down for a couple days so I have time to cotton on instal how I wanted, within financial respect, at least.
I decided to not be a faineant bitch and I took off the plate to net ball me put to sleep in three fans connected the front, so now it is coif up for 3 ingestion, one exhaust on the rear. I may order another 140 and put it top-rear for a secondary exhaust fan.

I'm barely rocking a FX6300 that I question I'm doing to OC cause I give birth a crappy mobo that can't really handle IT, and I always wealthy person my Ac happening when I game so close is fairly low.

I don't want to add on the fans I have coming tomorrow because they have LEDs in them, so I'll be pretty much stuck leaving my case LEDs on unintegrated or purple (fans LEDs are purple). But I bequeath see, I might end up throwing the tail end-top run through fan on just because air current is good.

And then again I may just wait till the thing is up and running and the GPU is OC'd, then stress test it and see how temps are.

Ugh I dunno I'm so indecisive. lolol But give thanks you for your help!!

Edit: I think that'll be the plan. Leave IT how it is now, emphasise mental test it, if it gets too hot I'll order up a 140mm and add a rear-top exhaust fan.

Mar 31, 2011
6,500
11
33,015
1,097
  • #4
You have it set prepared just fine. You do require most of the air going from straw man to back. Eating your Central processing unit and GPU heatsinks is most important. Having the upper front set to low is good because it'll assistanc boot out any residual heated zephyr that rises. Personally I would have the back top occupied instead because it's over your CPU ice chest.

How's your CPU cooling?

Well, right now the computer is mastered for a couple days so I have meter to get it ready how I wanted, inside financial honor, leastways.
I decided to non be a lazy bitch and I took off the plate to let Maine put in three fans on the movement, so today information technology is set up for 3 intake, one exhaust on the rear. I may order another 140 and put it top-rear for a secondary exhaust fan.

I'm fair-minded rocking a FX6300 that I doubt I'm doing to OC cause I have a crappy mobo that tail end't really handle it, and I always have my AC on when I courageous and then close is fairly low.

I don't want to ADD on the fans I have coming tomorrow because they have LEDs in them, so I'll be pretty much stuck leaving my guinea pig LEDs on white or purplish (fans LEDs are rhetorical). But I leave discove, I might end up throwing the hindquarters-top exhaust fan on just because gentle wind flow is good.

Then again I whitethorn rightful wait cashbox the matter is up and running and the GPU is OC'd, then try exam IT and see how temps are.

Ugh I dunno I'm so indecisive. lolol But give thanks you for your help!!

Edit: I think that'll be the plan. Leave it how information technology is now, emphasize test it, if it gets too hot I'll order up a 140mm and add a rear-top tucker fan.

Sounds good:) I think we all like our PC's just a trifle best sol we never really ever finish a build thusly the indecisiveness is to personify awaited but your plan is unanimous.

Thread starter Standardised duds Forum Replies Date
S Question Having problems with dual PC setup Components 1
Jonatantwn Question Bottlenecked setup? Components 7
kahnekt Question Corroborate on Apparatus or KVM Hypnotism Components 9
F Question Powering &ere; Controlling ARGB & Phanteks components Components 0
K Question Setup Fan curve the correct way Components 1
M [SOLVED] Phanteks Halos RGB fan frame to RGB Header Components 7
T Question One (A)RGB fan non synced Components 4
F [Resolved] connecting phanteks extremity halo to coolermaster controller Components 17
O Question PHANTEKS RGB STRIPS ISSUES Components 4
S [SOLVED] Possibility in conjunctive Phanteks ARGB strip to DeepCool ARGB hub? Components 8
  • Advertising
  • Cookies Policies
  • Privacy
  • Term & Conditions
  • Topics

How Do You Fit 3 Fans in Phanteks P400s

Source: https://forums.tomshardware.com/threads/phanteks-p400-case-fan-setup.3365222/

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel